
The compact platform machine · heavy industrial · AS3100 certified

Machine photography from build, commissioning and site. A dimensioned GA for your build is issued with the proposal.
Quoted as a working system: machine, services check, chemistry, baskets, commissioning and first recipes — one number, ex GST.
The 300 is the smallest platform machine in the EvoSonic range: a 700 × 700 mm powered deck with a 400 mm stroke, lifting loads in and out of a 750 × 750 mm SS316L tank. Six generators deliver 9,000 watts peak of 25 kHz at 30 W/L — the highest power density in the range.
Control is a Siemens HMI with programmable cycles, filtration is a 5 µm single-line cartridge on a Lowara pump, and the electrical cabinet is air-conditioned for hot workshops. If parts arrive on a trolley rather than a crane, this is the EvoSonic that fits both the job and the floor.

The platform does the immersion: parts load at bench height onto the 700 × 700 mm deck, the up/down mechanism takes them into the bath, and raise-to-drain happens over the tank — no hoist, no wet lifting.
Behind the panel, six Misonics VarioSonic X generator modules drive six side-mounted tube resonators with autotune — the same electronics that power the rest of the EVS range, holding every channel on resonance as load and temperature change.
The lid is manual — the automation budget went into the platform and the ultrasonics, where it earns its keep.
Blocks, heads and housings at truck scale — the documented one-immersion strip.
Final drives, cylinders, undercarriage and GET — wash-bay soils at wash-bay scale.
Whole-core immersion for bundles and radiators — see the case study.
Turbine hardware, filters and exchangers — the sector page covers the duty.
Drawn from the Misonics machine specification and general arrangement.
The EVS 300 delivers the ultrasonics and oscillation stages. We quote the matching rinse tank and drying stage alongside the machine — see the multistage guide.
The daily bath for oils, grease and workshop soils — 5% in water, works from warm.
Product, SDS & TDS →Ferrous carbon & paintThe heavy-hitter for baked carbon on steel and iron — the chemistry the SS316L tank was built to hold.
Product, SDS & TDS →Precision & approvalsAerospace-approved aqueous for new-manufacture and precision work; 815 QR-NF for MRO carbon.
Product, SDS & TDS →Items marked TBC are being confirmed for publication.
POA is not a brush-off. Tell us the duty and the options, and what comes back is a real number on a real proposal — machine, options, delivery and commissioning to your site.
Each choice becomes a priced line. Not sure? Pick “advise me” and we size it from your duty.
This is what makes the price real — the deposit and the throughput decide chemistry, cycle and filtration.
300 L · 9,000 W peak at 25 kHz · 750 × 750 mm tank, 600 mm deep · 700 × 700 mm powered platform · 12 kW heating · weir + 5 µm filtration · Siemens HMI
The 300 is the compact platform machine. For longer parts and bigger loads the EVS 600 and EVS 800 step up in tank — or build your own EVS.