Home / Machines
Industrial ultrasonic cleaners · Australia

Industrial ultrasonic cleaners,
engineered and supported in Australia.

One line-up, smallest to largest — from a 3.3 litre PowerSonic benchtop, up through the workshop and production ranges, to a 45,540 litre immersion tank. One question decides which one you need: what has to come off, and how clean does it have to be? Size, frequency and automation all follow from that answer.

Start at the bench, build up in range — then drill into the model that fits the part.

The range — smallest to largest

Every machine we build, in one line-up

Ten families in order of scale, 3.3 to 45,540 litres. Answer any of the three questions below to highlight the families that fit — or just scan the line-up; the right machine is the smallest one your part fits in.

Duty Process Volume
PowerSonic Benchtop ultrasonic cleaning machines
PowerSonic · 3.3 – 20.7 L

PowerSonic Benchtop

Benchtop units for jewellery, dental, electronics, firearms and laboratory work. Listed pricing, available to rent before you buy.

4 models · PS 603 to PS 620Explore the range →
MSX Benchtop ultrasonic cleaning machines
MSX · 15 – 30 L

MSX Benchtop

Light industrial benchtop tanks for trade, service and maintenance work — where the job is real but it does not need a floor-standing machine.

2 models · MSX 15, MSX 30Explore the range →
MSX Floor-Standing ultrasonic cleaning machines
MSX · 50 – 240 L

MSX Floor-Standing

Built for everyday workshop cleaning. Floor-standing industrial tanks with the basket capacity for engine components, tooling and production batches.

6 models · MSX 50 to MSX 240Explore the range →
UltraWash sealed-chamber ultrasonic cleaning machine
UltraWash · 70 – 300 L

UltraWash

A sealed chamber running spray, injection flood, rotating ultrasonics, rinse, hot-air and vacuum drying as one programmed sequence. In dirty, out clean and dry.

3 models + custom chamberExplore the range →
Sonos Series ultrasonic cleaning machines
Sonos · 85 – 220 L

Sonos Series

One platform, three levels of automation — manual SonoWash, powered-lift SonoLift, or a fully automated multi-tank SonoLine. Same tanks, staged investment.

3 platforms · manual · lift · lineExplore the range →
UltraKleen Pro three-station ultrasonic cleaning line
UltraKleen Pro · 100 – 320 L

UltraKleen Pro

Three cleaning stations in a row: wash, rinse, hot-air dry — with horizontal roller travel, top-down loading, and a collection tank behind every wet tank.

3 models + custom lineExplore the range →
Misonics EVS 7000-PL heavy industrial ultrasonic tank
EvoSonic · 180 – 7,000 L

EvoSonic EVS

Heavy industrial immersion with the elevator platform doing every lift — engine blocks, heat exchangers, filter elements and fabricated assemblies.

7 models + custom buildsExplore the range →
UltraMax HX giant immersion tank in build and test
UltraMax HX · 11,880 – 45,540 L

UltraMax HX

The top of the range. Giant immersion tanks built around the heat exchanger bundle — four working lengths to 14.5 metres.

3 sizes · 3 m, 6 m, 12 mExplore the range →
A Misonics custom-built multi-stage ultrasonic line during commissioning
Engineered to order

Custom builds

Multi-stage lines, passivation and degreasing systems, and one-off tanks built around a part that nothing standard suits.

CM seriesExplore the range →
Misonics 360-degree rod resonator
Components

Naked Sonics

The sonics without the tank. Generators, immersible arrays and 360° rod resonators — to retrofit a vessel you already own, or revive one that has gone deaf.

3 component familiesExplore the range →
How to navigate this

Three steps to the right machine

1
Choose the familyBy scale and by how automated the process needs to be.
2
Open the range pageThe argument for that platform, and how its models compare.
3
Drill into the modelFull specification, and whether your part actually fits.
Also worth knowing

Before you choose

Rent, try, buy

Weekly rental from $26. Prove the process in your own plant before you commit capital — rental credits toward purchase.

The chemistry

The machine is half the process. 36 products — degreasers, descalers, passivation and rust prevention.

Temperature & substrate

The detergent has an optimum temperature range, but the part material sets the safe operating limit — often lower. Get this wrong and clean parts come out stained.

Not sure which group?

Send us the parts. We run them on the machine we would actually specify, record the cycle, and give you the result measured against your standard — before you spend anything. That is how every system we have delivered started.

Talk to an engineer