Click to enlargeThe floor-standing starter · medium industrial · AS3100 certified
Click to enlargeFront elevation
Product renders from the MSX 50 CAD model.
Floor machines are quoted to site — power, chemistry, baskets and commissioning included in one number. Same-day response.
Or rent — $140/week, 21-day risk-freeDrag to rotate. Front panel, isolator, drain valve, castors, service side — the whole machine, because you should be able to see what you are specifying before it arrives on a truck.
The MSX 50 is where the floor range begins: a 50-litre, 3 mm SS316 insulated tank on a full stand, driven by 1,500 watts of industrial 25 kHz with load sensing and stepless power. The 500 × 300 mm basket swallows cylinder heads, carburettor banks, pump housings and tooling trays — and at 30 W/L it carries the highest power density of any floor machine in the range. Single-phase 240 V means it goes where the work is, no switchboard project required.
From carby banks to cylinder heads — the daily-duty floor machine.
Blocks and heads stripped in one immersion — read the documented process.
The two-bath ash process at floor scale — flow-tested per filter.
Whole-core immersion recovery — fins, tubes and headers together.
The daily bath for oils, grease and workshop soils — 5% in water, works from warm.
Product, SDS & TDS →Ferrous carbon & paintThe heavy-hitter for baked carbon on steel and iron — the chemistry the 1.5 mm SS316 tank was built to hold.
Product, SDS & TDS →Precision & approvalsAerospace-approved aqueous for new-manufacture and precision work; 815 QR-NF for MRO carbon.
Product, SDS & TDS →