BFR 3 Bag Filter Housing — 3 Bags, 72 m3/h

Specification

BFR 3 at a glance

Filter bags	3 × Size 2 (φ180 × 810 mm)
Flow rate	72 m³/h
Filter area	1.5 m² standard · 3.0 m² HiSEP
Design pressure	1.0 MPa
Design temperature	0–250 °C (seal and bag dependent)
Filtration range	1–2000 µm
Inlet / outlet	DN100 / DN125
Approx. volume	190 L
Housing material	304 or 316L stainless
Seal options	NBR · EPDM · Viton · silicone · PTFE-encapsulated · PTFE
Internal finish	120-mesh polish standard · food-grade optional
Connections	Flanged HG20592-2009 (DIN) · HG20615-2009 (ANSI) optional

Flow is quoted for clean water at 10 µm. Derate for viscosity, finer ratings and solids loading — tell us the fluid and we will size it properly.

BFR 3 quick-open multi-bag filter housing

Why this size

Half again the filter area for the same flow

Half again the filter area for the same flow — the choice when bag change frequency is the problem, not throughput.

Bag change

Cover open in 20 seconds from one standing position. 3 bags out, 3 in, cover closed.

Interlocked

Cannot be opened until vented and pressure relieved.

One consumable

Size 2 bags — the same bag as every other housing in the range. See the media options →

Price on application

Housings are quoted to duty — vessel size, material, seal compound, internal finish, connections and any certification requirement all move the price. Give us the fluid and the flow and you get a firm number, plus the expected bag change interval so you can budget the consumable too. Request a quote →

Tell us the duty, not the part number

Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.

Request a filtration quote Back to filtration

BFR 3

BFR 3 at a glance

Half again the filter area for the same flow

If this is not the one

BFR 2

BFR 4

BFR 6

BFR 8

BFR 12

Tell us the duty, not the part number