One vessel, one bag, quick-opening cover. Four bag sizes from 6 to 40 m³/h, 10 bar, in 304, 316L or carbon steel.
The single-bag housing is where most filtration duties start and a great many of them end. One vessel, one bag, a quick-opening top cover, and a footprint you can put almost anywhere. Where the solids load is modest or the flow is under 40 m³/h, a multi-bag housing is capacity you pay for and never use.
| Model | Bag size | Filter area | Max flow (water) | Volume |
|---|---|---|---|---|
| HL 1P3S | Size #3 | 0.09 m² | 6 m³/h | 3 L |
| HL 1P4S | Size #4 | 0.16 m² | 12 m³/h | 4.5 L |
| HL 1P1S | Size #1 | 0.25 m² | 20 m³/h | 15.5 L |
| HL 1P2S | Size #2 | 0.5 m² | 40 m³/h | 27 L |
Design pressure 10 bar. Housing in SS304, SS316L or carbon steel. Seals in silicone, Viton, EPDM or PTFE. Connections flanged, NPT or BSP. Quick-opening top cover — rocker-arm or eye-bolt type depending on size. Flow figures are for clean water — derate for viscosity, fine ratings and solids loading.
0.5 m², up to 40 m³/h. The most stocked bag in the world, and the same bag every multi-bag housing takes. Start here unless there is a reason not to.
0.25 m², up to 20 m³/h. When headroom above the vessel is limited.
0.09 and 0.16 m². Low flow, tight spaces, sampling and polishing duties.
Housings are quoted to duty — vessel size, material, seal compound, internal finish, connections and any certification requirement all move the price. Give us the fluid and the flow and you get a firm number, plus the expected bag change interval so you can budget the consumable too. Request a quote →
Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.