Three to twelve bags, 120 to 480 m³/h. More area at the same face velocity — longer runs, not just more flow.
A multi-bag housing is not simply a bigger filter. Putting more bags in parallel means more filter area at the same face velocity — so you get longer runs between changes rather than merely more flow. Every bag is Size 2, so the consumable does not change as you scale.
| Model | Bags | Inlet / outlet | Max flow | Filter area |
|---|---|---|---|---|
| HLM3P2S | 3 | DN80 | 120 m³/h | 1.5 m² |
| HLM4P2S | 4 | DN100 | 160 m³/h | 2.0 m² |
| HLM6P2S | 6 | DN150 | 240 m³/h | 3.0 m² |
| HLM8P2S | 8 | DN150 | 320 m³/h | 4.0 m² |
| HLM10P2S | 10 | DN200 | 400 m³/h | 5.0 m² |
| HLM12P2S | 12 | DN200 | 480 m³/h | 6.0 m² |
Design pressure 0.8 MPa, recommended working pressure 0.6 MPa. Housing in SS304, SS316L or carbon steel; seals in silicone, Viton, EPDM or PTFE. Polished or sandblast finish. Configurations from 2 bags upward available on request. Filter area shown for standard Size 2 bags at 0.5 m² each — roughly double with high-area bags.
Need the cover open in twenty seconds instead of undoing a ring of bolts? That is the quick-open BFR range. Cannot stop the process to change a bag at all? That is a duplex arrangement.
Housings are quoted to duty — vessel size, material, seal compound, internal finish, connections and any certification requirement all move the price. Give us the fluid and the flow and you get a firm number, plus the expected bag change interval so you can budget the consumable too. Request a quote →
Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.