Housings, pump, valves, gauges and pipework built onto a bunded frame with handrail and access — pressure tested and function checked before it leaves us.
You can buy a housing, a pump, a valve set, gauges, pipework and a frame from six suppliers, then pay someone on site to make them into a system and find out on the day whether it works. Or the whole thing arrives on a frame, already piped, already tested.
Pressure tested and function checked as an assembly. Problems get found in a workshop, not in your plant.
The base is a containment bund. Anything that leaks is caught rather than reaching your floor drain.
Grated deck, handrail and stair, so bag changes at height are a normal task rather than a working-at-height problem.
It arrives, it gets lifted into place, it gets connected. It can also be relocated when the plant changes.
Two or three vessels with changeover valving, so one filters while another is changed. No production stop for a bag.
Differential pressure across each vessel, so bags are changed on the reading rather than the calendar.
| The fluid | What it is, viscosity, and whether it is hot |
| Flow rate | m³/h, and whether it is continuous or batch |
| What you are removing | Particle type, size and roughly how much per hour |
| Target rating | The micron you need out — or the problem you need solved, and we will work it back |
| Can it stop? | If not, it is a duplex or triplex arrangement |
| Materials | 304 or 316L, and any seal restriction from the fluid |
| Site | Space available, connection sizes, power, and whether it is a hazardous area |
If you do not know some of these, that is normal — the first two and a sample of the fluid are usually enough for us to start.
Product certificate stating design pressure, design temperature, materials, filter area, connections and seal, plus the hydro-test report showing the test pressure and hold time. The three four-bag vessels we supplied to Flexiparts in December 2024 were hydro-tested to 1 MPa held 30 minutes under the German AD pressure-vessel procedure. See an example certificate →
Where the installation requires registration or third-party inspection under Australian pressure-equipment requirements, raise it at enquiry stage so the documentation is specified before manufacture.
Some of this is far easier to show than to describe.
Video placeholders — footage to be produced. Each slot is a standard 16:9 embed.
Housings are quoted to duty — vessel size, material, seal compound, internal finish, connections and any certification requirement all move the price. Give us the fluid and the flow and you get a firm number, plus the expected bag change interval so you can budget the consumable too. Request a quote →
Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.