Dive cylinders and regulators racked on a dive boat, ready for service
Industries / Facilities & Service / Sports & Recreation
Industries · Facilities & Service

Ultrasonic Cleaning for Sports & Recreation

Service workshops win on turnaround and finish quality: a drivetrain that runs silent, a regulator that breathes clean, hardware that comes back looking new. Hand cleaning delivers neither at retail speed.

Misonics systems give bike shops, dive centres and service businesses workshop-grade cleaning in minutes per basket — consistent regardless of who is on the bench.

Prove It On Your Parts See What We Remove
The Contamination Problem

What we remove in sports & recreation

Chain lube & road grime

Waxed and oiled films through drivetrains and bearings.

Salt & chloride residues

Through dive and marine sports equipment — the corrosion driver.

Body oils & residues

On contact equipment and protective hardware.

Carbon & propellant fouling

In sporting firearms components.

Corrosion & oxidation

On aged and restored equipment.

The endpoint is a defined, repeatable process condition — cycle time, chemistry, concentration, frequency and temperature are recorded parameters, not operator judgement.
Components We Clean

Real parts, real materials

Cycling

Cassettes, chains, derailleurs, brake hardware — drivetrains stripped to bare metal in minutes.

CassettesChainsCalipers

Dive & watersports

Regulators, valves, BCD hardware — salt out of internals to service specification.

RegulatorsValvesFittings

Sporting firearms & restoration

Sporting firearms components and restoration hardware — cleaned without altering finish or patina where it matters.

BoltsFittingsHardware
Why Ultrasonics — And Why These Machines

Cavitation cleans geometry it cannot see

Bubble collapse at the liquid–metal boundary lifts contamination from passages, galleries and cavities without anything touching the surface. Nothing abrades, nothing embeds, no metal is removed.

GeneratorResonance held all shift

The VarioSonic G5 tracks the transducer array as temperature and load shift — conversion efficiency up to 95%.

Sound fieldSweep modulation

Eliminates standing-wave hot and cold zones across a loaded basket.

Process controlLogged, recipe-driven cycles

Stored recipes and logged cycles — audit evidence produced as a by-product of running.

Bath conditionFiltration & oil separation

Multi-stage filtration and weir oil capture hold results steady as the bath loads.

SupportOver-the-air diagnostics

Most faults identified — many resolved — without a site visit.

ConstructionBuilt to work hard

Heavy 316 stainless tanks, tested before despatch, every wearing part replaceable.

Equipment Fit

The machine follows the process

From manually loaded single-tank units to automated lines — and engineered systems where the catalogue ends.

Powersonic

Bench units sized for retail workshops.

Explore the range →

MSX

Higher-volume platforms for service centres.

Explore the range →
Chemistry

Matched to the soil and the substrate

Retail service runs simple, safe alkaline formulations — aluminium-safe for drivetrains, controlled chemistry for regulators and anodised finishes.

Applications Matrix

Component coverage at a glance

Component categorySpecific parts / assembliesCompatible materials
CyclingDrivetrain, brake, bearing partsAluminium, steels, titanium
DiveRegulator and valve internalsBrass chrome-plated, stainless
Firearms (sporting)Bolts, carriers, small partsSteels, finishes
Fitness & climbingHardware, connectorsAluminium, steels
RestorationPeriod hardwareBrass, bronze, aged finishes

Prove it on your parts

Where an application needs validation, we clean sample components in our laboratory, document the result, and specify the machine around the verified process. If ultrasonics is the wrong answer, the trial shows that too, and we will tell you.

Talk to an engineer
FAQ

What sports engineers ask us

Will it strip anodising or patina?
Correct chemistry preserves both — restoration work deliberately leaves aged surfaces intact.
How fast is a drivetrain?
Minutes per basket — a shop's daily service load runs through one unit.
Dive regulators to service spec?
Yes — salt and residue out of internals ahead of rebuild, confirmed against the service specification.
Does it fit a retail footprint?
Bench units run on a standard outlet at 3.3 litres upward.
Related Industries · Facilities & Service

Also in this sector

Commercial Facilities & Property

HVAC components, fixtures and maintenance hardware for building services.

Flood & Fire Restoration

Contents restoration after fire and flood — soot, smoke residue and corrosion arrest.