Pharma and Medical Parts Cleaning, Ultrasonic
In pharmaceutical and medical environments, cleaning is a validated process with a documented endpoint — not a task. Residues carry over into product; undocumented cycles carry over into audit findings.
Misonics systems deliver validated ultrasonic cleaning for pharmaceutical, medical and laboratory hardware — recipe-controlled, cycle-logged, and specified alongside your quality system rather than after it.
What we remove in life sciences & pharma
API & product residues
Active ingredient carryover on format parts and processing hardware.
Excipient & coating films
Sugar, polymer and coating residues through tablet and capsule tooling.
Biological soils
Proteinaceous residues on laboratory and processing equipment.
Lubricant & assembly residues
On machine parts entering clean areas.
Particulate
Where visible-clean is not clean enough.
Real parts, real materials
Pharmaceutical production
Tablet tooling, format parts, filling-line change parts — residue-free between batches and products.
Medical & laboratory
Instruments, laboratory hardware and reusable equipment — cleaned to documented endpoint ahead of sterilisation.
High-purity & oxygen service
Components for oxygen and high-purity gas service — hydrocarbon-free to specification, verified.
Cavitation cleans geometry it cannot see
Bubble collapse at the liquid–metal boundary lifts contamination from passages, galleries and cavities without anything touching the surface. Nothing abrades, nothing embeds, no metal is removed.
The VarioSonic G4 tracks the transducer array as temperature and load shift — conversion efficiency up to 95%.
Eliminates standing-wave hot and cold zones across a loaded basket.
Stored recipes and logged cycles — audit evidence produced as a by-product of running.
Multi-stage filtration and weir oil capture hold results steady as the bath loads.
Most faults identified — many resolved — without a site visit.
Heavy 316 stainless tanks, tested before despatch, every wearing part replaceable.
The machine follows the process
From manually loaded single-tank units to automated lines — and engineered systems where the catalogue ends.
Matched to the soil and the substrate
Chemistry is selected against your residue set and cleaning-validation protocol — free-rinsing, documented, with Brulin high-purity formulations where oxygen service or aerospace-grade cleanliness applies.
Component coverage at a glance
| Component category | Specific parts / assemblies | Compatible materials |
|---|---|---|
| Tablet tooling | Punches, dies, turrets parts | Tool steels, chrome finishes |
| Format parts | Change parts, guides, feed hardware | Stainless, polymers |
| Filling | Nozzles, pumps, valves | 316L stainless |
| Laboratory | Glassware, fittings, hardware | Glass, stainless, PTFE |
| Medical | Instruments, trays | Stainless, titanium |
| High-purity | Oxygen and gas components | Stainless, brass, monel |
What are you cleaning?
Tell us what the part is, what comes off it, and what it has to pass. Technical sales will tell you whether ultrasonics is the right answer for that part and what it takes to run it on your own floor.