Misonics BF-3
Half again the filter area for the same flow — the choice when bag change frequency is the problem, not throughput.
BF-3 at a glance
| Filter bags | 3 × Size 2 (φ180 × 810 mm) |
| Flow rate | 72 m³/h |
| Filter area | 1.5 m² standard · 3.0 m² HiSEP |
| Design pressure | 1.0 MPa |
| Design temperature | 0–250 °C (seal and bag dependent) |
| Filtration range | 1–2000 µm |
| Inlet / outlet | DN100 / DN125 |
| Approx. volume | 190 L |
| Housing material | 304 or 316L stainless |
| Seal options | NBR · EPDM · Viton · silicone · PTFE-encapsulated · PTFE |
| Internal finish | 120-mesh polish standard · food-grade optional |
| Connections | Flanged HG20592-2009 (DIN) · HG20615-2009 (ANSI) optional |
Flow is quoted for clean water at 10 µm. Derate for viscosity, finer ratings and solids loading — tell us the fluid and we will size it properly.
Half again the filter area for the same flow
Half again the filter area for the same flow — the choice when bag change frequency is the problem, not throughput.
Cover open in 20 seconds from one standing position. 3 bags out, 3 in, cover closed.
Cannot be opened until vented and pressure relieved.
Size 2 bags — the same bag as every other housing in the range. See the media options →
Housings are quoted to duty — vessel size, material, seal compound, internal finish, connections and any certification requirement all move the price. Give us the fluid and the flow and you get a firm number, plus the expected bag change interval so you can budget the consumable too. Request a quote →
What are you filtering?
Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.